Fits Almost Anywhere
The Mr1000 Series Msr Is Only 100Mm Long And Can Fit Almost Anywhere, Making It Ideal For Pos And Desktop Applications. Whether It Is Used Stand Alone Or Attached To A Monitor, Touchscreen Or All-In-One Unit, The Mr1000 Provides The Functionality Needed With An Extremely Small Form Factor.

Easily Programmable
The Mr1000 Series Msr Is Easily Programmable Through The Programming Utilityî–¸ Intuitive Graphical User Interface. By Simply Clicking On Buttons And Entering Parameters, An Integrator Can Easily Set Up The Mr1000 For Use With A Minimal Invetment In Time And Training. It Is Easy To Enable/Disable Tracks, Change Start And Stop Sentinels, And Add Prefixes, Field Terminators And Suffixes. A Built-In Decoder Reads All Combinations Of Tracks 1, 2 And 3. The Mr1000 Series Msr Also Supports A Wide Range Of Reading Speeds And Includes Special Firmware To Avoid Transmission Errors Due To Bus Contention.

Reliable And Low Cost
The Mr1000 Series Msr Is Both Extremely Reliable And Affordable. It Uses The Latet Technology That Provides Reliability And Speed That Is Superior To Other Products. The Reading Head Lasts Longer Than 1 Million Cycles And Can Read With A Swipe Made In Either Direction. A Dual Color Led Light And A Programmable Beep Indicate A Good Or Bad Read. A Stainless Steel Card Guide Is Used For An Extra Smooth Swipe. All Units Also Receive Full Functional And Quality Control Testing Before Leaving Logic Controls Facilities. Best Of All, This High Quality Unit Is Available At A Price That Easily Fits Into Any Budget.

MECHANICAL Weight 0.4 lbs. Dimensions (in mm) Width Length Height 32.5 100.0 31.5 Magnetic Head Number of Tracks(MR1000) Number of Tracks(MR1300) Track Width Core Material Life 2 ( Any Combination of Tracks 1 and 2 ) 3 ( Any Combination of Tracks 1, 2, and 3 ) 1.4 mm Permalloy or Sendust >1,000,000 passes Card Feed Speed Force Direction 100 to 1200 mm/sec 90g typical, 180g max. Bi-directional ELECTRICAL Supply Voltage Supply Ripple Current +5VDC 100 mv p-p max. 30 mA max. ENVIRONMENTAL Operating Temperature -10 to +55C Storage Temperature -30 to +70C Relative Humidity Operating Non-operating Vibration (10 to 55 Hz.) Shock 10 to 95% non-condensing 10 to 95% non-condensing 4 G's 30 G's INTERFACE Wedge Interface PS/2 standard (AT optional) Serial Protocol: Baud Rate Data Bit Parity RS232C 600, 1200, 2400, 9600*, 19,200 7, 8* None*, Even, Odd * Default Preset at Factory USB HID Keyboard